#Team z drop spindles install

Wilwood ProSpindles are available in your choice of stock ride height or 2 in. ProSpindles use common Pinto and Mustang II wheel bearings, seals, ball joints, and tie rod ends for easy maintenance. High strength forged steel steering arms are included and can be run front or rear steer, or inverted if necessary to improve problematic steering characteristics such as bump steer with relocated or custom mounted steering linkages. Integral mounting bosses forged into the main body of the spindle provide substantially increased anchoring security for lug or radial mount calipers on rotors up to 14 inches. taller upper spindle body improves the front suspension geometry with a higher front roll center and decreased body roll with no changes to the lower control arm, frame height, or steering linkages. Team Z Motorsports Outlaw Style Drop Spindles provide a 2 drop while being paired up with Strange, Aerospace Components, or TBM brakes that use a standard. ProSpindles feature a one-piece forged steel body that is lightweight, yet nearly three times stronger than cast steel original equipment or aftermarket pressed pin replacement spindles. They give you increased strength, minimized weight, improved handling, and increased braking capacity on component cars, street rods, drag cars, etc. I did purchase the Ridetech system for my 72 Chevelle and it seemed to work very nicely, even with the weight of the 454 and 6-71. Everything is cut, constructed, and welded here in our shop. They have a standard arm length but provide a 2' drop to correct the steering geometry of your lowered Mustang. I am in the process of installing it this weekend, so I will soon find out. Our Team Z 1979- 2004 Mustang 2' Drop Spindles were designed to fit with standard style K-members that are utilizing Strange or Aerospace or TBM 87-93 V8 brakes. At least with my Camino, a 79, I ran it with 5662 springs and 2' Bell Techs (initially with stock brakes, then with the Hotchkis uppers arms and B-body spindles, eventually going with Carrera coil-overs with drop-spindles. Wilwood ProSpindles are designed for custom and competition applications using Mustang ll suspension geometry. Maybe I should have asked the question before I purchased my tubular control arms with 2' drop spindles. These 2-Inch Drop Spindles are engineered to fit all 1979-1993 Ford Mustang models.ĬA Residents: WARNING: Cancer and Reproductive Harm - be used with Wilwood Disc Brake Kits

#Team z drop spindles install

To install each component, directly mount it to your car’s existing points using common garage tools then secure it with the supplied hardware.Īpplication. Team Z 79-04 Mustang 2 Drop Spindles TZM-2ID.

Setting up these drop spindles requires some mechanical skills. Furthermore, their construction is fortified with a black powder coat finish to protect against corrosive elements.ĭirect Installation. Description Team Z 1979- 2004 Mustang 2' Drop Spindles were designed to work with spindle mount wheels and a standard style K-members and strut.Our spindle mount spindles were designed using a strange style spindle so they work with a strange spindle mount wheel brakes and TBM breaks. With this high-strength material, the spindles are able to provide excellent support without failing or breaking.

For a tough and long-lasting build, these drop spindles are manufactured using durable steel. What’s more, a lowered stance helps your car to have greater suspension travel and reduced aerodynamic drag.ĭurable Construction. These spindles are designed to provide a 2-inch drop without affecting your vehicle’s ride quality and handling.

Adding these 2-Inch Drop Spindles will allow your car to gain a lowered stance.